Does this Spark an idea?Īre Tanning Beds Sanitary? Tanning beds require the same high level of sanitation as hotel room beds. Another misconception is that using a tanning bed before a beach vacation will prevent sunburn however, this is not always the case. While this approach may provide you with a year-round tan, it also has the potential to be unsanitary or a health risk. Tanning beds are a popular way to get a suntan without spending time outdoors. The edges may be sharp, so make sure you are careful. Slide the acrylic slowly toward you, while still standing in front of the bed, until it is removed. Grasp the long edge of the acrylic that is now exposed.
You may need some extra help from another person while doing this. Use your flat head screwdriver to gently pry the acrylic up and over this lip. It is very important that you do not remove the end cap screws all the way. You may need to loosen these screws before removing the acrylic. Continue pulling the strip away from the tanning bed unit until it is removed. Once inserted, slowly begin to pry and grab the edge of the strip. Using the flat head screwdriver, insert it into the acrylic trim strip. It is crucial that you do this before removing parts of the tanning bed to avoid getting shocked. Does this Spark an idea?ĭisconnect all power to the tanning bed. You should always make sure you follow instructions closely when working with tanning beds, especially when changing parts such as the acrylics. Acrylics should be cleaned after each use, and completely changed after every 1000 hours. Tanning beds need regular maintenance to stay in the best condition and to maximize life of the product. The frame of the bed must be sturdy, and the cheapest pre-made frames cost around $800. Circuits, wires and control units can add another $500 to costs. Power ballasts can cost up to $2,000 for a 3,000-watt power ballast. Bulbs vary in both quality and strength and both of these factors contribute to price. A complete set of bulbs may be between $500 and $3,000, the variance in price is due to the variety of bulbs available. Homemade tanning beds do not come with a safety shut-off it is recommended to add an automatic shut-off feature to all homemade beds.Ĭost Building a homemade tanning bed costs several thousand dollars. Every tanning bed features an automatic safety shut-off this ensures not only the safety of the tanner but also the longevity of the bed. Many tanning beds are curved to wrap around the tanner, while others are flat. The construction of the bed itself is a designer's choice. All of these components are purchased separately and assembled at home.
#Sunquest tanning bed part series
The reason for this is that it is easier to adjust the distance between the bulbs and the tanner if the bed is vertical.įeatures A tanning bed is nothing more than a series of UVA bulbs connected to a circuit and ballast and mounted on a panel. For safety reasons, many homemade tanning beds are vertical instead of the traditional horizontal tanning bed found in most tanning salons. Size The size of the bed would be slightly larger than that of an average person standing, and most tanning beds are between 6 and 7 feet in length. Installing an additional 220-volt outlet is not difficult, but a licensed electrician should do the work. The only 220-volt outlet in most households is where the dryer plugs in. Alternatively, the tanning bed may require a 220-volt outlet, and the standard for households in North America is 120 volts. As a result, the tanning bed may need hardwiring to the house's electrical system, a process that requires a licensed electrician. The average outlet in a household can barely supply 1,000 watts through one outlet without blowing a circuit. This process is not necessarily easy and incorrect wiring can result in a short circuit, electrical fire or damaged bulbs.Ĭonsiderations Tanning beds require a high amount of power (up to 3,000 watts according to ). Due to the high power consumption of tanning beds, the bulbs must be correctly connected to a power ballast.
When building a tanning bed it is better to err on the side of caution when adding bulbs. Using too many bulbs or bulbs with a high power output can result in severe burns and excess heat. Warning The bulbs used in tanning beds are extremely powerful. Creating a tanning bed at home is possible but does require significant effort. In addition, The World Health Organization’s International Agency for Research on Cancer (IARC) has stated that UV tanning beds are carcinogenic to humans and are in its highest cancer risk category. It is much safer to purchase a pre-made tanning bed. A homemade tanning bed is not advised as slight miscalculations can result in serious health complications.